Linux 14.981 Themen, 106.343 Beiträge

Debian Probleme mit XFree86

DarkEvil / 11 Antworten / Flachansicht Nickles

Hallo,

ich bin ziemlich neu in der Linux(Debian) Gemeinschaft...8)
Leider komme ich ohne Hilfe nicht weiter. Ich möchte gern XFree zum laufen kriegen, erst hatte ich das Problem das die Mouse nicht lief. Doch das scheint nun behoben zu sein. Nun habe ich ein anderes Problem. Hier der Ende vom XFree.log

(**) Option "FlowControl" "None"
(==) Mouse0: Buttons: 3
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "BaudRate" "1200"
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list!

Laut dem da fehlen mir Font...nur wo und wie kriege ich diese ???

Bitte Hilfe !

bei Antwort benachrichtigen
DarkEvil the_mic „öffne mal die datei /etc/X11/XF86Config-4 in einem editor deiner wahl meine...“
Optionen

Hallo,

erstmal THX für die Antwort, nun habe ich ein weiteres Problem.
Wenn ich den XServer starte bleibt er so stehen....siehe unten !!!
Was soll ich da nun machen ? Kann man irgentwie den Status des X-Server kontrollieren ?

warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.20-8um i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 21 20:44:46 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 8

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) 3dfx Interactive Banshee rev 3, Mem @ 0xe4000000/25, 0xe8000000/25, I/O @ 0xd000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(--) Chipset 3dfx Banshee found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): Softbooting the board succeeded.
(==) TDFX(0): Depth 8, (==) framebuffer bpp 8
(==) TDFX(0): Default visual is PseudoColor
(--) TDFX(0): Chipset: "3dfx Banshee"
(--) TDFX(0): Linear framebuffer at 0xE8000000
(--) TDFX(0): MMIO registers at addr 0xE4000000
(--) TDFX(0): PIO registers at addr 0xD000
(II) TDFX(0): DRAMINIT1 read 0x23c031, programming 0x202031 (not Banshee)
(--) TDFX(0): VideoRAM: 16384 kByte Mapping 32768 kByte
(==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) TDFX(0): Monitor0: Using default hsync range of 28-33kHz
(WW) TDFX(0): Monitor0: using default vrefresh range of 43-72Hz
(II) TDFX(0): Clock range: 12.00 to 270.00 MHz
(II) TDFX(0): Not using default mode "640x350" (hsync out of range)
(II) TDFX(0): Not using default mode "640x400" (hsync out of range)
(II) TDFX(0): Not using default mode "720x400" (hsync out of range)
(II) TDFX(0): Not using default mode "640x480" (hsync out of range)
(II) TDFX(0): Not using default mode "640x480" (hsync out of range)
(II) TDFX(0): Not using default mode "640x480" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode "1024x768" (hsync out of range)
(II) TDFX(0): Not using default mode "1024x768" (hsync out of range)
(II) TDFX(0): Not using default mode "1024x768" (hsync out of range)
(II) TDFX(0): Not using default mode "1024x768" (hsync out of range)
(II) TDFX(0): Not using default mode "1152x864" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x960" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x960" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x1024" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x1024" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x1024" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "1792x1344" (hsync out of range)
(II) TDFX(0): Not using default mode "1792x1344" (hsync out of range)
(II) TDFX(0): Not using default mode "1856x1392" (hsync out of range)
(II) TDFX(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode "1920x1440" (hsync out of range)
(II) TDFX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode "1400x1050" (hsync out of range)
(II) TDFX(0): Not using default mode "1400x1050" (unknown reason)
(--) TDFX(0): Virtual size is 640x480 (pitch 640)
(**) TDFX(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(==) TDFX(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(**) TDFX(0): ShowCache Disabled
(**) TDFX(0): video key default 0x1e
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) TDFX(0): initializing int10
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): VESA BIOS detected
(II) TDFX(0): VESA VBE DDC supported
(==) TDFX(0): Write-combining range (0xe8000000,0x2000000)
(II) TDFX(0): Changing depth offset from 0x00fb4000 to 0x00fb3000
(II) TDFX(0): Textures Memory 14.53 MB
(II) TDFX(0): Cursor Offset: [0x00000000,0x00001000)
(II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000)
(II) TDFX(0): Front Buffer Offset: [0x00041000, 0x000E0600)
(II) TDFX(0): Texture Offset: [0x000E0600, 0x00F68000)
(II) TDFX(0): BackOffset: [0x00F68000, 0x00FB3000)
(II) TDFX(0): DepthOffset: [0x00FB3000, 0x00FFE000)
(II) TDFX(0): 1567 lines of offscreen memory available for 2D and video
(EE) TDFX(0): [dri] tdfx DRI not supported in 8 bpp mode, disabling DRI.
(II) TDFX(0): [dri] To use DRI, invoke the server using 16 bpp
(-depth 15 or -depth 16).
(II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided NonTEGlyphRenderer replacement
Setting up tile and stipple cache:
32 128x128 slots
7 256x256 slots
(==) TDFX(0): Backing store disabled
(==) TDFX(0): Silken mouse enabled
(==) TDFX(0): Direct rendering disabled
PEXExtensionInit: Couldn't open default PEX font file Roman_M
(**) Mouse0: Protocol: "Microsoft"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)

bei Antwort benachrichtigen