Sind halt definitiv keine normalen EXE Dateien und viel Ahnung hast du definitiv nicht!
OPTi 82C930 SOFTWARE LATEST INFORMATION
DOS/Window95 Utilities and Driver
Version v4.00.23, 03/20/96
Ist da z.B. drin und das sind selbstauspackende Archive!
https://www.7-zip.org/
Mit dem Tool kann man die selbst unter W10 auspacken!
2) INSTALLATION PROCESS
During the installation of 82C930 Windows 95 driver,
the installation program will insert a line in AUTOEXEC.BAT to
invoke the SND4DOS program to install the 82c930 DOS driver.
After installed the Windows 95 driver, the Windows 95 asks for
a reboot to make the new hardware (in this case, sound device)
to work properly. After reboot, the SND4DOS will be invoked and
bring up the DOS driver installation program (install.com on the
installation disk ) to install the DOS driver and remove the line
SND4DOS inserted in AUTOEXEC.BAT.
Please follow the following procedure to install the software:
1. Follow the installation guideline provided with 930 Windows 95
driver to install the Windows 95 driver.
2. During the first reboot after installed the 930 Windows 95
driver, the program SND4DOS will take over. Just follow the
instrution of SND4DOS to bring OPTi DOS Installer to setup
the Sound Card for your Windows 95 real DOS environment.
!! If you decide not to install at current time, you always
have a chance to re-setup your sound card support for DOS
later. Just type C:\SND4DOS at your Real Mode DOS Prompt.
INSTALL.COM and SNDINIT.EXE will do the followings for you:
a.) Create the directory \OPTI930 (assuming: default) in your
hard disk drive.
b.) Prompt you for CD-ROM and sound card options so that after
you have finished the installation and have rebooted your
machine, you will be ready to use the sound card.
c.) Copy the files with INSTALL.COM to the OPTI930 directory
and Windows directory respectively if you set "WIN31" and
"WINAPP" in DISK1 file to be "YES". If not, only the
DOS-related files will be copied to OPTI930 directory.
d.) Update your CONFIG.SYS, AUTOEXEC.BAT and SYSTEM.INI files
In CONFIG.SYS, the following will be added:
- DEVICE=C:\OPTI930\CDSETUP.SYS /T:S /P:340
(assuming SONY CD-ROM)
DEVICE=C:\OPTI930\SLCD.SYS /D:MSCD000 /B:340
In AUTOEXEC.BAT:
- PATH=C:\OPTI930 (appended)
SET SOUND16=C:\OPTI930
C:\OPTI930\SNDINIT /B
SET BLASTER=A220 I5 D1 T4
Und wem das da nur Bahnhof sagt...
Alpha13
