Meine Festplatte liefert mir unten angeführte Fehlermeldung.
Kann ich da noch was machen, oder ist die festplatte eh schon gestorben?
Wär\' nett, wenn mir jemand weiterhelfen könnte.
Danke im Voraus für eure Zeit.
Wirklich interessant scheint diese Passage:
10 Spin_Retry_Count 0x002b 221 218 223 Pre-fail Always FAILING_NOW 32
Hier der vollständige Auszug:
smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 96147H6
Serial Number: V60ALA1C
Firmware Version: ZAH814Y0
User Capacity: 61,473,226,752 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0
Local Time is: Sun Jan 23 19:08:51 2005 Westeuropäische Normalzeit
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 64) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 46) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 81
3 Spin_Up_Time 0x0027 203 202 063 Pre-fail Always - 13827
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 1577
5 Reallocated_Sector_Ct 0x0033 214 214 063 Pre-fail Always - 99
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 235 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 249 240 187 Pre-fail Always - 51122
9 Power_On_Minutes 0x0032 253 251 000 Old_age Always - 0h+28m
10 Spin_Retry_Count 0x002b 221 218 223 Pre-fail Always FAILING_NOW 32
11 Calibration_Retry_Count 0x002b 247 246 223 Pre-fail Always - 6
12 Power_Cycle_Count 0x0032 250 250 000 Old_age Always - 1336
196 Reallocated_Event_Count 0x0008 244 244 000 Old_age Offline - 9
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 198 024 000 Old_age Offline - 172
200 Multi_Zone_Error_Rate 0x000a 253 061 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 3
202 TA_Increase_Count 0x000a 253 249 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 234 233 000 Old_age Always - 19
208 Spin_Buzz 0x002a 244 243 000 Old_age Always - 9
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 1219 inconsistent with error log pointer 5
ATA Error Count: 1219 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1219 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 4f c2 a0 00 02:00:46.848 SMART RETURN STATUS
c5 00 08 97 91 4a e1 00 01:59:41.136 WRITE MULTIPLE
c5 00 05 07 a9 be e3 00 01:59:41.136 WRITE MULTIPLE
c5 00 08 5f fa 62 e0 00 01:59:38.848 WRITE MULTIPLE
c5 00 18 87 b2 61 e0 00 01:59:38.848 WRITE MULTIPLE
Error 1218 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 4f c2 a0 00 00:55:18.400 SMART RETURN STATUS
c5 00 08 37 00 5e e0 00 00:55:17.408 WRITE MULTIPLE
c5 00 08 47 00 5e e0 00 00:55:17.408 WRITE MULTIPLE
c5 00 10 d7 81 5e e0 00 00:55:17.408 WRITE MULTIPLE
c5 00 08 2f 00 5e e0 00 00:55:13.584 WRITE MULTIPLE
Error 1217 occurred at disk power-on lifetime: 665 hours (27 days + 17 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 4f c2 a0 00 00:22:13.824 SMART RETURN STATUS
c5 00 08 37 00 5e e0 00 00:22:10.032 WRITE MULTIPLE
c5 00 08 47 00 5e e0 00 00:22:10.032 WRITE MULTIPLE
c5 00 10 7f ac 5e e0 00 00:22:10.032 WRITE MULTIPLE
e7 00 00 00 00 00 a0 00 00:22:06.336 FLUSH CACHE
Error 1216 occurred at disk power-on lifetime: 660 hours (27 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 01:09:33.888 IDENTIFY PACKET DEVICE
c5 00 01 9f b7 fe e3 00 01:09:30.608 WRITE MULTIPLE
c4 00 01 9f b7 fe e3 00 01:09:30.608 READ MULTIPLE
c4 00 01 9f b7 fe e3 00 01:09:30.592 READ MULTIPLE
c5 00 01 9f b7 fe e3 00 01:09:30.592 WRITE MULTIPLE
Error 1215 occurred at disk power-on lifetime: 660 hours (27 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 a0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 00:57:10.320 IDENTIFY PACKET DEVICE
c5 00 01 9f b7 fe e3 00 00:57:07.040 WRITE MULTIPLE
c4 00 01 9f b7 fe e3 00 00:57:07.040 READ MULTIPLE
c4 00 01 9f b7 fe e3 00 00:57:07.024 READ MULTIPLE
c5 00 01 9f b7 fe e3 00 00:57:07.024 WRITE MULTIPLE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 00% 0 -
# 2 Short offline Completed: unknown failure 00% 665 -
Device does not support Selective Self Tests/Logging
hiddenpeak
