Hallo auf meinem NORMA PC DreamSys EZ5003 DE steht unter Video: 128 MB Radeon 9200 SE .... heißt SE vielleicht Shared....denn dann ist klar warum meine Kiste hundert Jahre braucht um was zu berechnen und ich, wenn ich ein Windows-Fenster verschieben will,nur noch schlieren sehe und man denken könnte, der Bildschirm wäre eingefroren ...
Welchen Speicher kann ich nehmen ... bisher ist 1 x 256MB DIMM (DDR333) enthalten; lt. Beschreibung ist der maximale ausbau 2GB (2x 1024 MB DIMM) ....
Da kann ich doch sicherlich z.B: noch einen 1 x 256 MB DIMM (DDR333) dazu kaufen ? sind die alle gleich oder ist mit 256 MB DIMM DDR333 bereits alles geregelt (Sockel, PIN´s , Takt usw...) eventuell denke ich auch an 1 x 512 MB oder vielleicht an 1x256 (alt) zzgl. 1x512MB neu ??? was muß ich beachten ? oder mache ich gar nix falsch, wenn ich nur auf DIMM und DDR333 achte ???
Archiv RAM - Module, Marken, Murks 4.582 Themen, 22.751 Beiträge
WARUM bring SiSoft SANDRA anderen Hersteller ??? oder verwechsele ich das was...(da steht nix mit ABIT usw..)
SiSoftware Sandra
System
Manufacturer : TriGem Computer NETHERLANDS
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
Mainboard
Manufacturer : Elitegroup (ECS)
MP Support : 1 CPU(s)
MPS Version : 1.10
Model : SiS-661
System BIOS : 08/30/2004-SiS-661-6A7I4E1AC-00
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 2GB
Bank0/1 - A0 : DIMM Synchronous SDRAM 256MB/64
Bank2/3 - A1 : Empty
Chipset 1
Model : Elitegroup Computer Sys SiS661FX CPU to PCI Bridge
Bus(es) : ISA AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 4x 134MHz (536MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 200MHz / 2x 200MHz
Width : 64-bit
IO Queue Depth : 12 request(s)
Priority Master Queue Depth : 7 request(s)
Chipset 1 Hub Interface
Type : MUTOL
Width : 16-bit
Full Duplex : No
Multiplier : 1/1x
Logical/Chipset 1 Memory Banks
Bank 0 : 256MB DDR-SDRAM 2.5-3-3-6CL 1CMD
Channels : 1
Width : 64-bit
Refresh Rate : 7.80µs
Power Save Mode : No
Fixed Hole Present : No
APIC 1
Version : 1.01
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes
Memory Module(s)
Memory Module 1 : Samsung M3 68L3223ETN-CB3 060EC51F 256MB 8x(32Mx8) DDR-SDRAM PC2700U-2533-7010 (CL2.5 up to 167MHz) (CL2 up to 133MHz)
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 51.0°C / 123.8°F td
CPU Temperature : 41.0°C / 105.8°F
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 2446rpm
Voltage Sensor(s)
CPU Voltage : 1.33V
Aux Voltage : 2.61V
+3.3V Voltage : 3.31V
+5V Voltage : 5.05V
+12V Voltage : 11.36V
-12V Voltage : 0.64V
-5V Voltage : 0.07V
Standby Voltage : 4.89V
Battery Voltage : 3.18V
AGP Bus(es) on Hub 1
Version : 3.05
Speed : 8x
Fast-Writes Enabled : No
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 64MB
PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (1/1x PCIClk)
LPC Hub Controller 1
Model : Silicon Integrated Systems (SiS) PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
USB Controller 1
Model : Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 4
Model : Elitegroup Computer Sys SiS7002 USB 2.0 Enhanced Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 8
Companion Controllers : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : SiS 964 Int SMBus
Specification : 1.00
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : Yes
Speed : 55kHz
Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (Silicon Integrated Systems (SiS) SiS648FX PCI to AGP Bridge)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Used (Silicon Integrated Systems (SiS) PCI to ISA Bridge)
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available (Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller)
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Used
AGP (8h) : AGP 32-bit +5V Full-Length Available (Connect Components Ltd Radeon 9200 SE Series (RV280))
Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB0 : USB - None / None
Performance Tips
Tip 2530 : MPS 1.4 or later is recommended for MP systems. Check BIOS version.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Warning 2518 : Mainboard temperature is too high.
Tip 10 : To benchmark/test your PDA / SmartPhone, use the 'Switch Test System' button.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.