Ich habe ein PT 2200 Mainboard /Sockel 7 von FIC. Auf dem Board befindet sich eine 5-Pin-PS/2-Mausschnittstelle. Leider weiß ich nicht, auf welchem dieser Pins welches Signal liegt. FIC antwortet nicht. HILFE!!!
Mainboards, BIOS, Prozessoren, RAM 27.258 Themen, 123.553 Beiträge
Bavarius Elisabeth Gutknecht „Pinbelegung Onboard-PS/2-Mausschnittstelle“
Hi !
http://www.fic.com.tw/techsupport/faq/faqsgeneral.htm
Da steht u.a. geschrieben :
______________________________________________________
Q: How to install a PS/2 mouse on an FIC Socket 7 motherboard?
A: Enable PS/2 in Advanced Setup (AMI BIOS).
There is a label on the board which points to pin number one when connecting the PS/2 mouse adapter on the board. The Pin number two is not connected because the female connector (on PS/2 Mouse adapter) doesn't have wire on number two slot. The PS/2 mouse port is a 5 pins pin header which is located beside keyboard socket.
PIN#1-Mouse Data
PIN#2-N.C. (Not Connected)
PIN#3-Ground
PIN#4-Vcc
PIN#5-Mouse Clock
PIN#6-N.C. (Not Connected)
You can use a PS/2 mouse only if your system has a 5 pin Pin Header next to the key board connector. It is not recommended to use a mouse cable other than that included with the FIC Mainboard package.
The PS/2 mouse adapter part-number is 22-10208-01. To acquire it, contact nearest FIC Branch.
_____________________________________________________________
Und hier ist das zu finden :
http://www.fic.com.tw/techsupport/faq/faqsparts.htm
_____________________________________________________________
PS/2 mouse pin-out definition
You can use a PS/2 mouse only if your system has a 5 pin "Pin Header" next to the key board connector.
It is not recommended to use a mouse cable other than that included with the FIC Mainboard package.
__________________________________________________
Kannst Du mit diesen Infos was anfangen ?? :-))
cu Bavarius
